Flanges

Flanges

Flanges

Sizes ½ – 24″ ANSI, 150#, 300#, 600#, 900#, 1500#, 2500# Larger Sizes TO MSS-SP-44 and API-605

Pressures Vessel Connection

Long Weld Necks, HB Necks, Variable Body Nozzles, Studding Outlets, ½ – 24” 150#, 300#, 600#, 900#, 1500#, 2500#

Forgings

Round Bars, Ring Forgings, Solid Forgings, All Shapes

Nipples

Sizes ½ – 4″ A106, Standard, XH, S/160, XXH, All Lengths, A120 Standard, XH

Sizes and Ratings

  • ANSI B16.5 /ASME FORGED FLANGES Sizes of ½” to 24″ Class 150#, 300#, 400#, 600#, 900#, 1500# and 2500#
  • MSS-SP-44 FLANGES/ANSI B 16.47 SERIES A & B Sizes 24″ to 48″
    Class 150#, 300#, 600# and 900#
  • API TYPE 6A – RTJ Face Flanges
  • ANSI LONG WELDNECKS
  • REDUCING FLANGES
  • SPECTACLE BLINDS Class 150# and 30#

Materials

  • Carbon Steel – ASTM/ASME SA-105, A-350 LF-2, LF-3, A694, SA-516-70, A36
  • CHROME ALLOYS – A-182-F-1, F-5, F-6, F-7, F-9, F-11, F-12, F-22, F-51
  • STAINLESS STEEL – A-182 – F-304, 304L, 316, 316L, 309, 310, 317L, 321, 347, Alloy 20
  • ALUMINUM – 1100, 2014, 3003, 5083, 5086, 6061, 7075
  • HASTALLOY – B-2, C-276, G, X
  • INCONEL – 600, 601, 625, 718
  • INCOLLOY – 800, 825
  • MONEL – 400
  • COPPER – C11000
  • COPPER – NICKEL 90/10 To BS and ASTM Standards
  • TITANIUM

Brief Description

  • Welding Neck Flanges – Smooth hub transition from flange to weldend. Most common type of high-pressure flanges.
  • Slip-On Flanges – This flange fits over the pipe and is then welded in position.
  • Socket Weld Flanges – Pipe fits in to the recess to allow smooth flow through the flange.
  • Lap Joint Flanges – Mainly used with a matching stub end. Bolt holes can be aligned with pipe after welding.
  • Threaded Flanges – can be attached to the pipe without welding. Saves time and cost.
  • Swivel Ring Flanges – Mostly used for ease of assembly at subsea. High strength and resistance to external loads.
  • Blind Flanges – Normally a flat disk with raised or RTJ face to match mating flange.
  • Orifice Flanges – Mainly used for flow rate metering of pipelines.
  • Anchor/Hanger Flanges – supports pipelines and risers.